Ambient Weather WS-14 Bedienungsanleitung PDF herunterladen (Seite 7)

4.2 Manually Reset Max/Min

In normal mode, press the MIN/MAX button once to view the MAX values. Press the MIN/MAX

button again to view the MIN values.

Press the MIN/MAX button again to return to normal mode.

To reset the Max/Min values, press and hold the MIN/MAX- button for 3 seconds.

4.3 Channel Selection

Press the CH/+ button to switch the display between remote sensors 1 through 8, and scroll mode

. In scroll mode, all of detected outdoor sensors will be displayed in five second intervals.

4.4 Sensor Search Mode

If any of the remote sensor communication is lost, dashes (--.-) will be displayed on the screen. To

reacquire the signal:

1. If a specific channel is lost, press the CH/+ button to display this channel, then Press and hold

the CH/+ button for 3 seconds, and the remote search icon will be constantly displayed

for up to 3 minutes. Once the signal is reacquired, the remote search icon will turn off,

and the current values will be displayed.

2. If new sensors are added, subtracted, or multiple sensor channels are lost, press and hold the

CH/+ button for 5 seconds (on any channel), and the remote search icon will be

constantly displayed for up to 10 minutes. Once the signal is reacquired, the remote search

icon will turn off, and the current values will be displayed.

4.5 Best Practices for Wireless Communication

Note: To insure proper communication, mount the remote sensor on a vertical surface, such as a

wall. Do not lay the sensor flat.

Wireless communication is susceptible to interference, distance, walls and metal barriers. We

recommend the following best practices for trouble free wireless communication.

1. Electro-Magnetic Interference (EMI). Keep the console several feet away from computer

monitors and TVs.

2. Radio Frequency Interference (RFI). If you have other 433 MHz devices and

communication is intermittent, try turning off these other devices for troubleshooting

purposes. You may need to relocate the transmitters or receivers to avoid intermittent

communication.

3. Line of Sight Rating. This device is rated at 300 feet line of sight (no interference, barriers or

walls) but typically you will get 100 feet maximum under most real-world installations,

which include passing through barriers or walls.

4. Metal Barriers. Radio frequency will not pass through metal barriers such as aluminum

siding. If you have metal siding, align the remote and console through a window to get a clear

line of sight.

The following is a table of reception loss vs. the transmission medium. Each “wall” or obstruction

decreases the transmission range by the factor shown below.

Medium

RF Signal Strength Reduction

Glass (untreated)

5-15%

Plastics

10-15%

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Ambient Weather WS-14 Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wetterstationen Ambient Weather WS-14